P1 – Fork Positioner

P1 - Fork Positioner (ZVW)

Fork positioner
Rotatable fork positioner
Fork positioner with telescopic forks

The forks can be hydraulically or symmetrically positioned within a frame construction. The preferred model due to its solid, defect-resistant design particularly suitable for heavy-duty and full-service applications.
The positioning of the screwed-on forks takes place on a bottom and top lying chrome-plated shaft using lubricated bronze bushings. A combination with a sideshift valve or a separate sideshift is of course possible.
The load on the fork inner edges (spreading forces), such as that which arises during cable drum transport are easily handled by the design. With one-sided loading of trucks, telescopic forks can be attached instead of conventional forks. Rotatable fork positioner: Combination with an endlessly rotating 360° device is possible. Especially suitable
for emptying containers with differing bag distances. SH-Fork Positioners. Fork positioner integrated: Because of its direct installation in the mast, the weight and the front unit dimensions can be reduced. As a result, load-bearing capacity can be increased, especially in the design with the sideshift valve.

Fork positioner • shaft guidance »

01 Zinkenverstellgeraet-Wellenfuehrung

Model	For forklifts	ISO FEM	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	V	ESP	Weight
	to		kg	mm	mm	mm	mm	mm	mm	kg
P1-ZVW 2.0	1,6 - 2,0	II	2000	500	400-1000	1090	120×40×1000	110	190	250
P1-ZVW 2.0-6	2,0/600	II	2000	600	400-1100	1190	125×45×1000	110	200	275
P1-ZVW 2.5	2,5	II	2500	500	400-1100	1190	125×45×1000	110	200	275
P1-ZVW 2.5-6	2,5/600	II	2500	600	400-1100	1190	125×45×1000	110	200	280
P1-ZVW 3.0	3,0	III	3000	500	400-1100	1190	140×50×1000	125	200	380
P1-ZVW 3.0-6	3,0/600	III	3000	600	400-1100	1190	140×50×1000	125	200	385
P1-ZVW 3.5	3,5	III	3500	500	400-1200	1290	140×50×1000	125	195	390
P1-ZVW 3.5-6	3,5/600	III	3500	600	400-1200	1290	140×50×1000	140	185	445
P1-ZVW 4.0	4,0	III	4000	500	400-1300	1390	140×50×1000	140	180	455
P1-ZVW 4.5	4,0/600+4,5	III	4500	500	400-1300	1390	150×60×1000	140	190	490
P1-ZVW 5.0	4,5/600 - 5,0/600	III	5000	600	400-1300	1390	150×60×1000	140	195	495
P1-ZVW 5.0	5,0	IV	5000	600	400-1500	1620	150×60×1000	150	180	620
P1-ZVW 6.0	6,0	IV	6000	600	400-1700	1820	150×65×1000	150	185	670
P1-ZVW 7.0	7,0	IV	7000	600	400-1900	2020	150×70×1000	160	165	840
P1-ZVW 8.0	8,0	IV	8000	600	500-1900	2020	200×70×1000	160	190	950
P1-ZVW 8.0-9	8,0/900	IV	8000	900	500-2100	2220	200×70×1000	190	180	1270
P1-ZVW 10.0	10,0	IV	10000	600	500-2100	2220	200×70×1000	190	180	1270

For forks longer than 1600 mm, check whether the load-bearing capacity of the attachment is greater than or equal to the residual load-bearing capacity of the forklift, otherwise the next larger model must be selected.
Attachment without forks on request.

Surcharge for beveling the forks at the inside edges 25 mm / 45 °

Surcharge for rounding the forks at the outer edges or reduction of the positioning range to 0 mm for coil transport

Surcharge for protective grid

Fork positioner • Shaft guidance with sideshift valve »

02 Zinkenverstellgeraet-Wellenfuehrung mit Seitenschubventil

Model	For forklifts	ISO FEM	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	V	ESP	Weight
	to		kg	mm	mm	mm	mm	mm	mm	kg
P1-ZVWSV 2.0	1,6 - 2,0	II	2000	500	400-1000	1090	120×40×1000	110	190	255
P1-ZVWSV 2.0-6	2,0/600	II	2000	600	400-1100	1190	125×45×1000	110	200	280
P1-ZVWSV 2.5	2,5	II	2500	500	400-1100	1190	125×45×1000	110	200	280
P1-ZVWSV 2.5-6	2,5/600	II	2500	600	400-1100	1190	125×45×1000	110	200	285
P1-ZVWSV 3.0	3,0	III	3000	500	400-1100	1190	140×50×1000	125	200	390
P1-ZVWSV 3.0-6	3,0/600	III	3000	600	400-1100	1190	140×50×1000	125	200	395
P1-ZVWSV 3.5	3,5	III	3500	500	400-1200	1290	140×50×1000	125	195	400
P1-ZVWSV 3.5-6	3,5/600	III	3500	600	400-1200	1290	140×50×1000	140	180	455
P1-ZVWSV 4.0	4,0	III	4000	500	400-1300	1390	140×50×1000	140	175	465
P1-ZVWSV 4.5	4,0/600+4,5	III	4500	500	400-1300	1390	150×60×1000	140	185	500
P1-ZVWSV 5.0	4,5/600 - 5,0/600	III	5000	600	400-1300	1390	150×60×1000	140	190	510
P1-ZVWSV 5.0	5,0	IV	5000	600	400-1500	1620	150×60×1000	150	190	635
P1-ZVWSV 6.0	6,0	IV	6000	600	400-1700	1820	150×65×1000	150	180	685
P1-ZVWSV 7.0	7,0	IV	7000	600	400-1900	2020	150×70×1000	160	160	865
P1-ZVWSV 8.0	8,0	IV	8000	600	500-1900	2020	200×70×1000	160	185	975
P1-ZVWSV 8.0-9	8,0/900	IV	8000	900	500-2100	2220	200×70×1000	190	170	1305
P1-ZVWSV 10.0	10,0	IV	10000	600	500-2100	2220	200×70×1000	190	170	1305

For forks longer than 1600 mm, check whether the load-bearing capacity of the attachment is greater than or equal to the residual load-bearing capacity of the forklift, otherwise the next larger model must be selected.
Attachment without forks on request.

Surcharge for beveling the forks at the inside edges 25 mm / 45 °

Surcharge for rounding the forks at the outer edges or reduction of the positioning range to 0 mm for coil transport

Surcharge for protective grid

Fork positioner • Shaft guidance with separate sideshift »

03 Zinkenverstellgeraet-Wellenfuehrung mit seperatem Seitenschub

Model	For forklifts	ISO FEM	Load-bearing capacity	LSP	VB	B	Sideshift	Forks D × S × NL	V	ESP	Weight
	to		kg	mm	mm	mm	mm	mm	mm	mm	kg
P1-ZVWS 2.0	1,6 - 2,0	II	2000	500	400-1000	1090	+/-100	120×40×1000	150	210	280
P1-ZVWS 2.0-6	2,0/600	II	2000	600	400-1100	1190	+/-100	125×45×1000	150	220	305
P1-ZVWS 2.5	2,5	II	2500	500	400-1100	1190	+/-100	125×45×1000	150	220	305
P1-ZVWS 2.5-6	2,5/600	II	2500	600	400-1100	1190	+/-100	125×45×1000	150	220	310
P1-ZVWS 3.0	3,0	III	3000	500	400-1100	1190	+/-100	140×50×1000	165	205	450
P1-ZVWS 3.0-6	3,0/600	III	3000	600	400-1100	1190	+/-100	140×50×1000	165	205	455
P1-ZVWS 3.5	3,5	III	3500	500	400-1200	1290	+/-100	140×50×1000	165	200	460
P1-ZVWS 3.5-6	3,5/600	III	3500	600	400-1200	1290	+/-100	140×50×1000	180	200	515
P1-ZVWS 4.0	4,0	III	4000	500	400-1300	1390	+/-100	140×50×1000	180	195	525
P1-ZVWS 4.5	4,0/600+4,5	III	4500	500	400-1300	1390	+/-100	150×60×1000	180	205	560
P1-ZVWS 5.0	4,5/600 - 5,0/600	III	5000	500	400-1300	1390	+/-100	150×60×1000	190	215	565
P1-ZVWS 5.0	5,0	IV	5000	600	400-1500	1620	+/-100	150×60×1000	205	200	730
P1-ZVWS 6.0	6,0	IV	6000	600	400-1700	1820	+/-100	150×65×1000	205	205	780
P1-ZVWS 7.0	7,0	IV	7000	600	400-1900	2020	+/-160	150×70×1000	215	185	995
P1-ZVWS 8.0	8,0	IV	8000	600	500-1900	2020	+/-150	200×70×1000	190	180	1100
P1-ZVWS 8.0-9	8,0/900	IV	8000	900	500-2100	2220	+/-150	200×70×1000	220	175	1420
P1-ZVWS 10.0	10,0	IV	10000	600	500-2100	2220	+/-150	200×70×1000	220	175	1420

For forks longer than 1600 mm, check whether the load-bearing capacity of the attachment is greater than or equal to the residual load-bearing capacity of the forklift, otherwise the next larger model must be selected.
Attachment without forks on request.

Surcharge for beveling the forks at the inside edges 25 mm / 45 °

Surcharge for rounding the forks at the outer edges or reduction of the positioning range to 0 mm for coil transport

Surcharge for protective grid

Fork Positioner • Shaft guidance with telescopic forks »

10 Zinkenverstellgeraet-Wellenfuehrung mit Teleskopgabeln

Model	For forklifts	Load-bearing capacity width LSP 600 mm	ISO/ FEM	VB	B	D	S	L	Lift	C	V	ESP1/ ESP2	Weight
	to	kg		mm	mm	mm	mm	mm	mm	mm	mm	mm	kg
P1-ZVWTKG 2.0	2,0/600	2000	II	400-1000	1090	170	56	1200	850	45	110	310/410	360
P1-ZVWTKG 2.0	2,0/600	2000	II	400-1000	1090	170	56	1350	1000	45	110	360/480	370
P1-ZVWTKG 2.5	2,5/600	2500	II	400-1100	1190	170	56	1200	850	45	110	275/375	370
P1-ZVWTKG 2.5	2,5/600	2500	II	400-1100	1190	170	56	1350	1000	45	110	320/445	380
P1-ZVWTKG 3.0	3,0/600	3000	III	400-1100	1190	170	56	1200	850	45	125	250/330	465
P1-ZVWTKG 3.0	3,0/600	3000	III	400-1100	1190	170	56	1350	1000	45	125	280/370	475
P1-ZVWTKG 4.0	4,0/600	4000	III	400-1300	1390	170	57	1200	850	45	140	250/335	500
P1-ZVWTKG 4.0	4,0/600	4000	III	400-1300	1390	170	57	1350	1000	45	140	290/400	520
P1-ZVWTKG 4.5	4,5/600	4500	III	400-1300	1390	170	57	1200	850	45	140	265/345	520
P1-ZVWTKG 4.5	4,5/600	4500	III	400-1300	1390	170	57	1350	1000	45	140	290/385	540
P1-ZVWTKG 5.0	5,0/600	5000	IV	400-1500	1620	170	62	1200	850	50	150	225/280	660
P1-ZVWTKG 5.0	5,0/600	5000	IV	400-1500	1620	170	62	1350	1000	50	150	250/315	680
P1-ZVWTKG 6.0	6,0	6000	IV	400-1700	1820	170	62	1200	850	50	150	210/260	800
P1-ZVWTKG 6.0	6,0	6000	IV	400-1700	1820	170	62	1350	1000	50	150	240/305	830
P1-ZVWTKG 7.0	7,0	7000	IV	400-1900	2020	227	68	1200	850	50	160	240/295	910
P1-ZVWTKG 7.0	7,0	7000	IV	400-1900	2020	227	68	1350	1000	50	160	270/335	940
P1-ZVWTKG 8.0	8,0	8000	IV	500-1900	2020	227	76	1200	850	60	160	235/290	1020
P1-ZVWTKG 8.0	8,0	8000	IV	500-1900	2020	227	76	1350	1000	60	160	260/325	1065

Screwed on telescopic forks.
Other fork cross-sections and extension lengths on request.

Surcharge for wear-resistant manganese strips underneath the outer fork, thickness 5 mm

Surcharge for stops on each side of the fork rear

Surcharge for stops 400 mm high to reduce the utilizable fork length

Surcharge for stops 850 mm high to reduce the utilizable fork length

Fork Positioner • Shaft guidance with telescopic forks and separate sideshift »

11 Zinkenverstellgeraet-Wellenfuehrung mit Teleskopgabeln und separatem Seitenschub

Model	For forklifts	Load-bearing capacity with LSP 600 mm	ISO/ FEM	VB	B	Sideshift	D	S	L	Lift	C	V	ESP1/ ESP2	Weight
	to	kg		mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	kg
P1-ZVWSTKG 2.0	2,0/600	2000	II	400-1000	1090	+/-100	170	56	1200	850	45	150	290/380	380
P1-ZVWSTKG 2.0	2,0/600	2000	II	400-1000	1090	+/-100	170	56	1350	1000	45	150	340/450	385
P1-ZVWSTKG 2.5	2,5/600	2500	II	400-1100	1190	+/-100	170	56	1200	850	45	150	260/350	400
P1-ZVWSTKG 2.5	2,5/600	2500	II	400-1100	1190	+/-100	170	56	1350	1000	45	150	305/420	410
P1-ZVWSTKG 3.0	3,0/600	3000	III	400-1100	1190	+/-100	170	56	1200	850	45	165	235/305	520
P1-ZVWSTKG 3.0	3,0/600	3000	III	400-1100	1190	+/-100	170	56	1350	1000	45	165	260/340	530
P1-ZVWSTKG 4.0	4,0/600	4000	III	400-1300	1390	+/-100	170	57	1200	850	45	180	235/315	565
P1-ZVWSTKG 4.0	4,0/600	4000	III	400-1300	1390	+/-100	170	57	1350	1000	45	180	275/380	585
P1-ZVWSTKG 4.5	4,5/600	4500	III	400-1300	1390	+/-100	170	57	1200	850	45	180	250/325	585
P1-ZVWSTKG 4.5	4,5/600	4500	III	400-1300	1390	+/-100	170	57	1350	1000	45	180	275/365	605
P1-ZVWSTKG 5.0	5,0/600	5000	IV	400-1500	1620	+/-100	170	62	1200	850	50	205	205/260	765
P1-ZVWSTKG 5.0	5,0/600	5000	IV	400-1500	1620	+/-100	170	62	1350	1000	50	205	225/300	785
P1-ZVWSTKG 6.0	6,0	6000	IV	400-1700	1820	+/-100	170	62	1200	850	50	205	190/240	865
P1-ZVWSTKG 6.0	6,0	6000	IV	400-1700	1820	+/-100	170	62	1350	1000	50	205	210/280	895
P1-ZVWSTKG 7.0	7,0	7000	IV	400-1900	2020	+/-160	227	68	1200	850	50	215	230/285	935
P1-ZVWSTKG 7.0	7,0	7000	IV	400-1900	2020	+/-160	227	68	1350	1000	50	215	255/310	965
P1-ZVWSTKG 8.0	8,0	8000	IV	500-1900	2020	+/-150	227	76	1200	850	60	215	220/270	1120
P1-ZVWSTKG 8.0	8,0	8000	IV	500-1900	2020	+/-150	227	76	1350	1000	60	215	250/305	1165

Screwed on telescopic forks.
Other fork cross-sections and extension lengths on request.

Surcharge for wear-resistant manganese strips underneath the outer fork, thickness 5 mm

Surcharge for stops on each side of the fork rear

Surcharge for stops 400 mm high to reduce the utilizable fork length

Surcharge for stops 850 mm high to reduce the utilizable fork length

Fork Positioner • large opening range »

08 Zinkenverstellgeraet-großer Oeffnungsbereich

Model	For forklifts	ISO FEM	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	V	ESP	Weight
	to		kg	mm	mm	mm	mm	mm	mm	kg
P1-ZVB 2.0	1,6 - 2,0	II	2000	500	560-1750	1050	120×40×1000	145	220	330
P1-ZVB 2.5	2,5 - 2,5/600	II	2500	600	560-1750	1050	125×45×1000	145	210	340
P1-ZVB 3.0	3,0 - 3,0/600	III	3000	600	560-1850	1150	140×50×1000	170	215	450
P1-ZVB 3.5	3,5 - 3,5/600	III	3500	600	560-1950	1250	140×50×1000	170	215	460
P1-ZVB 4.0	4,0	III	4000	500	560-1950	1250	140×50×1000	170	210	470
P1-ZVB 4.5	4,0 - 5,0/600	III	4500	600	560-2050	1350	150×60×1000	190	190	660
P1-ZVB 5.0	5,0/600	IV	5000	600	560-2150	1450	150×60×1000	210	185	785
P1-ZVB 6.0	6,0	IV	6000	600	560-2300	1600	150×65×1000	210	190	870
P1-ZVB 7.0	7,0	IV	7000	600	560-2450	1750	150×70×1000	215	185	970
P1-ZVB 8.0	8,0	IV	8000	600	560-2450	1750	200×70×1000	215	190	1090

With screwed-on forks.
Larger load-bearing capacities and other positioning ranges on request.
Possible but not recommended with welded-on forks.
Not suitable for clamp work.

Fork positioner • large opening range with separate sideshift »

09 Zinkenverstellgeraet-großer Oeffnungsbereich mit separatem Seitenschub

Model	For forklifts	ISO FEM	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	Sideshift	V	ESP	Weight
	to		kg	mm	mm	mm	mm	mm	mm	mm	kg
P1-ZVBS 2.0	1,6 - 2,0	II	2000	500	560-1750	1050	120×40×1000	+/-100	185	235	350
P1-ZVBS 2.5	2,5 - 2,5/600	II	2500	600	560-1750	1050	125×45×1000	+/-100	185	245	370
P1-ZVBS 3.0	3,0 - 3,0/600	III	3000	600	560-1850	1150	140×50×1000	+/-100	185	250	505
P1-ZVBS 3.5	3,5 - 3,5/600	III	3500	600	560-1950	1250	140×50×1000	+/-100	210	225	510
P1-ZVBS 4.0	4,0	III	4000	500	560-1950	1250	140×50×1000	+/-100	240	220	535
P1-ZVBS 4.5	4,0 - 5,0/600	III	4500	600	560-2050	1350	150×60×1000	+/-100	240	240	755
P1-ZVBS 5.0	5,0/600	IV	5000	600	560-2150	1450	150×60×1000	+/-100	255	250	890
P1-ZVBS 6.0	6,0	IV	6000	600	560-2300	1600	150×65×1000	+/-100	255	215	935
P1-ZVBS 7.0	7,0	IV	7000	600	560-2450	1750	150×70×1000	+/-160	255	220	995
P1-ZVBS 8.0	8,0	IV	8000	600	560-2450	1750	200×70×1000	+/-150	255	225	1190

With screwed-on forks.
Larger load-bearing capacities and other positioning ranges on request.
Possible but not recommended with welded-on forks.
Not suitable for clamp work.

Fork Positioner • large opening range with telescopic forks »

12 Zinkenverstellgeraet-großer Oeffnungsbereich mit Teleskopgabeln

Model	For forklifts	Load-bearing capacity with LSP 600 mm	ISO/ FEM	VB	B	D	S	L	Hub	C	V	ESP1/ ESP2	Weight
	to	kg		mm	mm	mm	mm	mm	mm	mm	mm	mm	kg
P1-ZVBTKG 2.0	2,0/600	2000	II	560-1650	950	170	56	1200	850	45	145	280/370	415
P1-ZVBTKG 2.0	2,0/600	2000	II	560-1650	950	170	56	1350	1000	45	145	330/455	430
P1-ZVBTKG 2.5	2,5/600	2500	II	560-1750	1050	170	56	1200	850	45	145	275/360	430
P1-ZVBTKG 2.5	2,5/600	2500	II	560-1750	1050	170	56	1350	1000	45	145	320/440	445
P1-ZVBTKG 3.0	3,0/600	3000	III	560-1850	1150	170	56	1200	850	45	170	260/340	490
P1-ZVBTKG 3.0	3,0/600	3000	III	560-1850	1150	170	56	1350	1000	45	170	290/390	510
P1-ZVBTKG 4.0	4,0/600	4000	III	560-1950	1250	170	57	1200	850	45	210	240/305	575
P1-ZVBTKG 4.0	4,0/600	4000	III	560-1950	1250	170	57	1350	1000	45	210	275/355	595
P1-ZVBTKG 4.5	4,5/600	4500	III	560-2050	1350	170	57	1200	850	45	210	220/285	680
P1-ZVBTKG 4.5	4,5/600	4500	III	560-2050	1350	170	57	1350	1000	45	210	265/345	700
P1-ZVBTKG 5.0	5,0/600	5000	IV	560-2150	1450	170	62	1200	850	50	210	225/295	740
P1-ZVBTKG 5.0	5,0/600	5000	IV	560-2150	1450	170	62	1350	1000	50	210	265/310	760
P1-ZVBTKG 6.0	6,0	6000	IV	560-2300	1600	170	62	1200	850	50	240	235/300	775
P1-ZVBTKG 6.0	6,0	6000	IV	560-2300	1600	170	62	1350	1000	50	240	265/355	785
P1-ZVBTKG 7.0	7,0	7000	IV	560-2450	1750	227	66	1200	850	50	240	235/310	1150
P1-ZVBTKG 7.0	7,0	7000	IV	560-2450	1750	227	66	1350	1000	50	240	265/375	1200
P1-ZVBTKG 8.0	8,0	8000	IV	560-2450	1750	227	76	1200	850	60	240	225/280	1215
P1-ZVBTKG 8.0	8,0	8000	IV	560-2450	1750	227	76	1350	1000	60	240	260/330	1250

Screwed on telescopic forks.
Other fork cross-sections and extension lengths on request.

Surcharge for wear-resistant manganese strips underneath the outer fork, thickness 5 mm

Surcharge for stops on each side of the fork rear

Surcharge for stops 560 mm high to reduce the utilizable fork length

Surcharge for stops 850 mm high to reduce the utilizable fork length

Fork positioner • large opening range with telescopic forks and separate sideshift »

13 Zinkenverstellgeraet-großer Oeffnungsbereich mit Teleskopgabeln und separatem Seitenschub

Model	For forklifts	Load-bearing capacity with LSP 600 mm	ISO/ FEM	VB	B	Sideshift	D	S	L	Lift	C	V	ESP1/ ESP2	Weight
	to	kg		mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	kg
P1-ZVBSTKG 2.0	2,0/600	2000	II	560-1650	950	+/-100	170	56	1200	850	45	166	275/360	1440
P1-ZVBSTKG 2.0	2,0/600	2000	II	560-1650	950	+/-100	170	56	1350	1000	45	166	325/440	1455
P1-ZVBSTKG 2.5	2,5/600	2500	II	560-1750	1050	+/-100	170	56	1200	850	45	166	270/350	1455
P1-ZVBSTKG 2.5	2,5/600	2500	II	560-1750	1050	+/-100	170	56	1350	1000	45	166	310/425	1470
P1-ZVBSTKG 3.0	3,0/600	3000	III	560-1850	1150	+/-100	170	56	1200	850	45	166	255/330	1540
P1-ZVBSTKG 3.0	3,0/600	3000	III	560-1850	1150	+/-100	170	56	1350	1000	45	166	285/375	1560
P1-ZVBSTKG 4.0	4,0/600	4000	III	560-1950	1250	+/-100	170	57	1200	850	45	207	235/295	1625
P1-ZVBSTKG 4.0	4,0/600	4000	III	560-1950	1250	+/-100	170	57	1350	1000	45	207	265/340	1645
P1-ZVBSTKG 4.5	4,5/600	4500	III	560-2050	1350	+/-100	170	57	1200	850	45	207	225/285	745
P1-ZVBSTKG 4.5	4,5/600	4500	III	560-2050	1350	+/-100	170	57	1350	1000	45	207	265/335	765
P1-ZVBSTKG 5.0	5,0/600	5000	IV	560-2150	1450	+/-100	170	62	1200	850	50	229	235/300	1865
P1-ZVBSTKG 5.0	5,0/600	5000	IV	560-2150	1450	+/-100	170	62	1350	1000	50	229	270/355	1885
P1-ZVBSTKG 6.0	6,0	6000	IV	560-2300	1600	+/-100	170	62	1200	850	50	229	230/290	1890
P1-ZVBSTKG 6.0	6,0	6000	IV	560-2300	1600	+/-100	170	62	1350	1000	50	229	265/350	1910
P1-ZVBSTKG 7.0	7,0	7000	IV	560-2450	1750	+/-160	227	66	1200	850	50	250	235/305	1275
P1-ZVBSTKG 7.0	7,0	7000	IV	560-2450	1750	+/-160	227	66	1350	1000	50	250	265/370	1325
P1-ZVBSTKG 8.0	8,0	8000	IV	560-2450	1750	+/-150	227	76	1200	850	60	250	230/285	1340
P1-ZVBSTKG 8.0	8,0	8000	IV	560-2450	1750	+/-150	227	76	1350	1000	60	250	260/330	1375

Screwed on telescopic forks.
Other fork cross-sections and extension lengths on request.

Surcharge for wear-resistant manganese strips underneath the outer fork, thickness 5 mm

Surcharge for stops on each side of the fork rear

Surcharge for stops 560 mm high to reduce the utilizable fork length

Surcharge for stops 850 mm high to reduce the utilizable fork length

Fork positioner • rotatable 360endless »

07 Zinkenverstellgeraet-drehbar 360 endlos

Model	For forklifts	ISO FEM	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	V	ESP	Weight
	to		kg	mm	mm	mm	mm	mm	mm	kg
P1-ZVWD 2.0	1,6 - 2,0	II	2000	500	400-1000	1090	120×40×1000	240	220	455
P1-ZVWD 2.5	2,5/500	II	2500	500	400-1100	1190	125×45×1000	240	230	480
P1-ZVWD 2.5-6	3,0	III	2500	600	400-1100	1190	125×45×1000	250	240	485
P1-ZVWD 3.0	3,5 - 4.0	III	3000	500	400-1100	1190	140×50×1000	260	250	605
P1-ZVWD 4.0	4,5 - 5,0	III	4000	500	400-1300	1390	140×50×1000	275	250	715
P1-ZVWD 4.5	5,0 - 5,0/600	III	4500	600	400-1300	1390	150×60×1000	275	240	740
P1-ZVWD 5.0	5,0/600 - 6,0	IV	5000	600	400-1500	1620	150×60×1000	300	270	1015
P1-ZVWD 6.0	7,0 - 8,0	IV	6000	600	400-1700	1820	150×65×1000	325	240	1230

With screwed-on forks.
Rotatable fork adjustment with higher load-bearing capacity on request.

Surcharge for solenoid valve

Surcharge for foundry design

Surcharge for integrated design

Integrated fork positioner • Shaft guidance »

04 Integriertes-Zinkenverstellgeraet-Wellenfuehrung

Model	For forklifts	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	V	ESP	Weight
	to	kg	mm	mm	mm	mm	mm	mm	kg
P1-ZVWI 2.0	1,6 - 2,0	2000	500	400-1000	1090	120×40×1000	110	190	250
P1-ZVWI 2.0-6	2,0/600	2000	600	400-1100	1190	125×45×1000	110	200	275
P1-ZVWI 2.5	2,5	2500	500	400-1100	1190	125×45×1000	110	200	275
P1-ZVWI 2.5-6	2,5/600	2500	600	400-1100	1190	125×45×1000	110	200	280
P1-ZVWI 3.0	3,0	3000	500	400-1100	1190	140×50×1000	125	200	380
P1-ZVWI 3.0-6	3,0/600	3000	600	400-1100	1190	140×50×1000	125	200	385
P1-ZVWI 3.5	3,5	3500	500	400-1200	1290	140×50×1000	125	195	390
P1-ZVWI 3.5-6	3,5/600	3500	600	400-1200	1290	140×50×1000	140	185	445
P1-ZVWI 4.0	4,0	4000	500	400-1300	1390	140×50×1000	140	180	455
P1-ZVWI 4.5	4,0/600+4,5	4500	500	400-1300	1390	150×60×1000	140	190	490
P1-ZVWI 5.0	4,5/600 - 5,0/600	5000	600	400-1300	1390	150×60×1000	140	195	495
P1-ZVWI 5.0	5,0/600	5000	600	400-1500	1620	150×60×1000	150	180	620
P1-ZVWI 6.0	6,0	6000	600	400-1700	1820	150×65×1000	150	185	670
P1-ZVWI 7.0	7,0	7000	600	400-1900	2020	150×70×1000	160	165	840
P1-ZVWI 8.0	8,0	8000	600	500-1900	2020	200×70×1000	160	190	950
P1-ZVWI 8.0-9	8,0/900	8000	900	500-2100	2220	200×70×1000	190	180	1270
P1-ZVWI 8.0-11	8,0/1100	8000	1100	500-2100	2220	200×80×1000	190	190	1320
P1-ZVWI 10.0	10,0	10000	600	500-2100	2220	200×70×1000	190	180	1270
P1-ZVWI 12.0	12,0	12000	600	500-2100	2220	200×80×1000	190	190	1320

With screwed-on forks.
Front unit dimensions, center of gravity and weight from the front edge of the side bolster.
For forks longer than 1600 mm, check whether the load-bearing capacity of the attachment is greater than or equal to the residual load-bearing capacity of the forklift, otherwise the next larger model must be selected.
Fork carriages or side bolsters with welded-on roller bolts are to be provided or only roller bolts and chain holders, so that the side bolsters need to be made.

Surcharge for side bolsters for integrated devices

Surcharge for beveling the forks at the inside edges 25 mm / 45 °

Surcharge for rounding the forks at the outer edges or reduction of the positioning range to 0 mm for coil transport

Surcharge for protective grid

Integrated fork positioner • Shaft guidance with sideshift valve »

05 Integriertes-Zinkenverstellgeraet-Wellenfuehrung mit Seitenschubventil

Model	For forklifts	Load-bearing capacity	LSP	VB	B	Forks D × S × NL	V	ESP	Weight
	to	kg	mm	mm	mm	mm	mm	mm	kg
P1-ZVWISV 2.0	1,6 - 2,0	2000	500	400-1000	1090	120×40×1000	110	190	255
P1-ZVWISV 2.0-6	2,0/600	2000	600	400-1100	1190	125×45×1000	110	200	280
P1-ZVWISV 2.5	2,5	2500	500	400-1100	1190	125×45×1000	110	200	280
P1-ZVWISV 2.5-6	2,5/600	2500	600	400-1100	1190	125×45×1000	110	200	285
P1-ZVWISV 3.0	3,0	3000	500	400-1100	1190	140×50×1000	125	200	390
P1-ZVWISV 3.0-6	3,0/600	3000	600	400-1100	1190	140×50×1000	125	200	395
P1-ZVWISV 3.5	3,5	3500	500	400-1200	1290	140×50×1000	125	195	400
P1-ZVWISV 3.5-6	3,5/600	3500	600	400-1200	1290	140×50×1000	140	180	455
P1-ZVWISV 4.0	4,0	4000	500	400-1300	1390	140×50×1000	140	175	465
P1-ZVWISV 4.5	4,0/600+4,5	4500	500	400-1300	1390	150×60×1000	140	185	500
P1-ZVWISV 5.0	4,5/600 - 5,0/600	5000	600	400-1300	1390	150×60×1000	140	190	510
P1-ZVWISV 5.0	5,0/600	5000